Production Process of Ceramic Tower Packing

Chemshun Ceramics Company is a factory specializing in the production of industrial ceramics. As a manufacturer of ceramics tower packing, the production process of ceramic chemical fillings is shared as follows:

1. Prepare raw materials: It is necessary to prepare various raw materials, such as clay, limestone, etc., and mix them according to the formula ratio.

2. Stirring and mixing: Put the raw materials into the mixer, add appropriate amount of water and other additives, and stir and mix them evenly.

3. Molding: Put the mixed raw materials into the mold and mold them through equipment such as presses or extruders.

4. Drying: Put the molded Raschig rings in a drying room to dry and remove moisture.

5. Firing: Put the dried Raschig rings into a high-temperature kiln and fire them so that the organic matter in them is completely burned and the inorganic matter is melted and crystallized.

6. Cooling: Cool the fired Raschig rings naturally to room temperature.

7. Screening: Screen the cooled Raschig rings and classify them according to different specifications and particle size requirements.

8. Packaging: Pack the Raschig ring fillers that meet the requirements for easy transportation and use.

The above production process is only a general process. The specific production process may vary due to factors such as raw materials, formula, production equipment, etc. In the actual production process, it is necessary to adjust and optimize according to the specific situation.